Setting „n2” counter, Setting „m2” number of pieces – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 117
Advertising
24.8.5. Setting „N2” counter
Procedure:
• Enter
<P7 WORK MODES> according to 11.2. and then:
• Inscribe
N2 value to be exceeded for triggering cc label,
• Confirm it with
.
Return to weighing:
See 11.3.
24.8.6. Setting „M2” number of pieces
Procedure:
• Enter
<P7 WORK MODES> according to 11.2. and then:
• Inscribe
M2 value to be exceeded for triggering cc label,
• Confirm it with
.
Return to weighing:
See 11.3.
- 117 -
Advertising
This manual is related to the following products: