Starting work modes – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 112
Advertising
• Enter the required number of dosing cycles using the scale keyboard
(acceptable settings are 1 to 10) and confirm it by pressing
.
Return to weighing:
See 11.3.
24.7.7. Starting work modes
After entering the DOSING mode the
pictogram is displayed.
Press
to start a dosing process. After starting it
starts
blinking, keyboard is blocked until the process is completed.
The process completion is signalled by displaying a message:
<END OF DOSING> in the bottom line of the display:
- 112 -
Advertising
This manual is related to the following products: