RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 167)

- 167 -
29. ERROR MESSAGES
ERROR ”XXX” ESC – RETURN TO PREVIOUS SETTING
(where: XXX – parameter name) – confirmed with ENTER
of a wrong value in the user’s menu,
Err2 - Value beyond the zero range,
Err3 - Value beyond the tare range,
Err4 - Calibration mass or start mass adjustment error
(
±1% for weight, ±10% for start mass),
Err5 - Mass of a single piece lower than the 0.1 of scale division,
Err6 - Mass of all pcs (declared as standard) lower than one
division,
Err8 - Tarring / zeroing operation time exceeded,
NULL - Zero value from the AD converter,
FULL2 - Measurement range overflow,
HI - Display range overflow,
LH - Start mass error, the mass on the weighing platform
is beyond the acceptable range
±20 of start mass
30. TROUBLE SHOOTING
Problem Cause Solution
Scale switches off
automatically „t1” parameter set to „YES”
(Power save)
In <P9 OTHERS> change
<P9.3 AUTO SWITCH.> to
„NO”
„LH” appears on the
display Weight pan not empty
when switching on Unload the pan. Indication
returns to zero