Time interval completing process, Mode for outputs – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 107
Advertising
• Using numeric keys inscribe the required value (0 to 60 s)
and confirm by pressing
.
Return to weighing:
See 11.3.
24.7.3. Time interval completing process
Users can set <P7.4.3 CHUTE TIME> parameter to change time
of completing a process of dosing after indication drops below LO.
Procedure:
• Enter
<P7 WORK MODES> and then:
Using numeric keys inscribe a requires value (0 to 60 s) and confirm
by pressing
.
Return to weighing:
See 11.3.
24.7.4. Mode for OUTPUTS
Software includes three different algorithms operating on OUTPUTS
that allows the device to readjust to the customer’s requirements.
Procedure:
• Enter
<P7 WORK MODES> and then:
- 107 -
Advertising
This manual is related to the following products: