Configuration of external inputs / outputs, Configuration of external buttons – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 81
• After editing all the variables press
to go to <PRINT REPORTS>,
• Press
, you will see the following screen:
• Using
select one of four report patterns (report patterns
description – see ch. 17.6.4),
• Press
to printout a report according to the selected pattern.
Caution:
If filtering according to all variables is disabled, the report from
all the weighings will be printed out.
Return to weighing:
See 11.3.
20. CONFIGURATION OF EXTERNAL INPUTS / OUTPUTS
20.1. Configuration of external buttons
Following external buttons can be connected:
TARE BUTT
Tare button
PRINT BUTT
Print button
ZERO BUTT
Zero button
START BUTT
Start button,
Start weighing animals button
STOP BUTT
Button for breaking dosing process,
Button for breaking weighing animals
EXT. START
Input signal allowing to START dosing
TERM. BUTT.
Terminating of dosing process
CHUTE PERM.
Perdition input signal for chute
- 81 -