Setting „n1” counter, Setting „m1” number of pieces – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 116
Advertising
24.8.3. Setting „N1” counter
Procedure:
• Enter
<P7 WORK MODES> according to 11.2. and then:
• Inscribe
the
N1 value to be exceeded for triggering c label,
• Confirm it with
.
Return to weighing:
See 11.3.
24.8.4. Setting „M1” number of pieces
Procedure:
• Enter
<P7 WORK MODES> according to 11.2. and then:
• Inscribe
M1 value to be exceeded for triggering c label,
• Confirm it with
.
Return to weighing:
See 11.3.
- 116 -
Advertising
This manual is related to the following products: