Downloading labels‘ patterns to terminals – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 177
11. Chose <Barcode> from the list e.g. EAN-13.
12. Chose from list <Variable> item „7 Net mass in adjustment unit”
and press
, then the variable is placed in the table
of variables show below.
13. In column <Formatter> type:V6.3 (mass in EAN13 as a 6-digit code
with 3 decimal places).
14. Confirm the entered item by pressing
, then the barcode
is automatically placed on the label.
15. Save the created pattern chosing from the menu „File / Export *.lb”.
Notice:
Recorded templates of labels in files with *.lb extension are not editable.
This is advisable to record designs of labels in files with *.lab extension
as well (software menu: File / Save as…) to use/edit the designs of
labels in the future.
32.3.2. Downloading labels‘ patterns to terminals
Procedure:
1. Run software EDYTOR WPW and start communication of the
software with the scale according to ch 32.2 of the manual
2. Open database „Labels” – line: Databases / Databases / Labels.
The key
makes readout of the database from the
connected scale:
- 177 -