Weighings in two ranges, Toggling between weight units, Selection of basic unit – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 25: Toggli g between weight units
Advertising
12.5. Weighings in two ranges
Switching between the I range and the II range happens automatically
(exceeding Max of the I range).
Weighings in the second range is signalled by a pictogram in the top left
corner of the display.
Then weighings is done with the accuracy of the II range to the moment
of returning to zero (autozero range
) where the scale switches back
to the I range.
12.6. Toggling between weight units
12.6.1. Selection of basic unit
This function sets the unit that will be set after powering on.
Procedure:
• While In weighings mode press
and then:
- 25 -
Advertising
This manual is related to the following products: