Tarring mode setting – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 108
Advertising
OUTPUT MOD.
Threshold
Rough
dosing
Precise
dosing
THERSHOLD 1
1
0
1_2
THERSHOLD 2
0
1
THERSHOLD 1
1
1
12_1
THERSHOLD 2
1
0
THERSHOLD 1
1
1
1_12
THERSHOLD 2
0
1
Return to weighing:
See 11.3.
Caution:
If dosing is initiated when the indication is > LO , after reaching the
indication below LO output (outputs)will be automatically switched on.
Subsequent dosing process can be started when indication goes below
LO.
24.7.5. Tarring mode setting
The parameter <P7.4.5 TARRING> allows to enable/disable automatic
tarring in DOSING mode.
Procedure:
• Enter
<P7 WORK MODES> and then:
- 108 -
Advertising
This manual is related to the following products: