Triggering off „c label – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 114
Advertising
24.8.1. Triggering off „C LABEL”
Operators can use one of three ways to trigger off cumulative labels
depending on <P7.5.1 C LABEL> setting.
Procedure:
• Enter
<P7 WORK MODES> according to 11.2. and then:
KEY
-
printing c labels after pressing
,
COUNTER
-
printing c labels after exceeding N1,
PIECES
-
printing c labels after exceeding the
number of pieces set in SUM 1.
Caution:
After printing a c label N2 counter and SUM 2 are incremented
and N1 counter and SUM 1 are set to zero.
Return to weighing:
See 11.3.
- 114 -
Advertising
This manual is related to the following products: