Setting the length parameter, Cooperation with a transponder card reader, Coop ation with a transponder card reader – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 46
Advertising
Return to weighing:
See 11.3.
15.3.3. Setting the LENGTH parameter
Procedure:
• Enter
<P3.3 BARCODE SCANER> and then set the LENGTH
parameter – the number if character in barcodes (counting from
START) that is to be analysed during the assortment database
search:
Return to weighing:
See 11.3.
15.4. Cooperation with a transponder card reader
Operators can be logged in after powering up the device or previous
logging out by:
• Inscribing a password using the scale keyboard,
• Using transponder cards to log in.
- 46 -
Advertising
This manual is related to the following products: