RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 126)

• Set the parameters of counting pieces <P7.5 COUNT. PIECES>),
• Estimate and ascribe standard masses of samples for products,
• Start to weight products following the weighing procedure
(see Chapter 12. WEIGHING),
• The label is printed on the printer after the key
is pressed.
In the bottom line there is the weighing number N and total mass
of weighings SUM,
• If the same products are still going to be weight (product is not
changed) after the scale shows zero (or after its zeroing) please put
next load on the scale. After the weight is stable press the key ,
• If different products are going to be weight press the key
, select
assortment and confirm it with the key ,
• Following labelling procedure is the same as the one shown above.
24.8.18. Printing cumulative labels
Cumulative labels C LABELS can include summarized values of single
weighings until the moment of printing this label. A cumulative label is
sticked to the package with a number of goods with single labels on
them that have been weight so far. Such a label can be printed only
for products for which it has been designed.
There are three criteria of printing cumulative labels:
• After exceeding the given number of weighings of one product
(„N1” counter),
• After exceeding the number of pieces „M1”,
• Printing anytime after pressing a key.
To print using keys :
• Press , and you will see:
- 126 -