Corrections, Correction mode, Corr ctions – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 109
Advertising
Return to weighing:
See 11.3.
24.7.6. Corrections
Work mode <DOSAGE> can have automatically corrected nominal mass
in the dosing procedure that allows to optimize the procedure considering
pressure changes of dosed substance in the hopper or other container.
In parameters’ group <P7.4.6 DOSING CORRECTIONS> users can set
parameters that refer to introducing mass correction.
24.7.6.1. Correction mode
Procedure:
• Enter
<P7 WORK MODES> and then:
- 109 -
Advertising
This manual is related to the following products: