RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 119)

• Enter
<P7 WORK MODE> and then:
The function of Automatic Correction of Accuracy in counting pieces
works during weighing the reference quantity and is signalled by blinking
pictogram in the upper right corner.
Return to weighing:
See 11.3.
24.8.9. Setting of the number of labels to print
In the parameter <P7.5.9 NO OF LABELS> user defines the amount
of labels. They are printed on the printer connected to the weight.
Procedure:
• Enter parameters group <P7 WORK MODES> following
point 11.2. of the manual and then:
- 119 -