Return to weighing mode, Weighing, Tarring function – RADWAG WPT/8B 300C Ramps Bed Scales User Manual
Page 19
- 19 -
Selecting a parameter on one menu level
Changing the value of an active parameter
Entering a selected submenu
Activating a parameter for modification
Accepting carried out changes
Leaving a function without saving changes
Moving one level “up” in menu structure
11.2.2. Return to weighing mode
The changes made in scale’s memory are permanently saved
on returning to weighing mode with procedure of saving
carried out changes.
Press
key for a few times until the display indicates
message <SAuE?>. Then press:
– to save changes or
– to abandon changes.
On pressing one of the above keys, the scale automatically
returns to weighing mode.
12. WEIGHING
For patients moving on the weighing platform it is recommended to set
higher filtering level (see point 13.1 of this user manual). In such case the
weighing time is longer, but the obtained measurement result is reliable.
12.1. Tarring function
Place a nappy or a blanket on the scale’s weighing platform.
•
After indication stabilizing, signaled by accompanying pictograms
press
key (mass indication returns to zero, and Net pictogram is
lit up in the upper left corner of the display).