Manual printout – RADWAG WPT/8B 300C Ramps Bed Scales User Manual
Page 53
- 53 -
20.5. Manual printout
Medical scale enables generating manual printouts. The manual printout is
generated after placing a weighed load on scale’s weighing platform,
stabilization of measurement result and pressing
key.
Caution:
If the scale is a verified one, then printout of unstable / instantaneous data
in disabled.
Format of mass printout:
1
2
3
4 -12
13
14
15
16
17
18
stability
marker
space
sign
mass
space
unit
CR
LF
Stability marker
[space] if stable
[?] if unstable
[^] if error of exceeding range to “+” occurs
[v] if error of exceeding range to “-“ occurs
sign
[space] for positive values or
[-] for negative values
mass
9 characters with decimal point and right
justification
unit
3 characters with left justification
command
3 characters with left justification
Example 1:
_ _ _ _ _ _ 1 8 3 2 . 0 _ g _ _ CR LF - a printout generated from a scale on
pressing ENTER/PRINT key.
Example 2:
? _ - _ _ _ _ 2 . 2 3 7 _ l b _ CR LF - a printout generated from a scale on
pressing ENTER/PRINT key.
Example 3:
^ _ _ _ _ _ _ 0 . 0 0 0 _ k g _ CR LF - a printout generated from a scale on
pressing ENTER/PRINT key.