RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 35)

- 35 -
immediate replacing used batteries with new ones or charging the
accumulators.
Low voltage signaling:
•
pictogram appears on the display,
• If a scale operates with low battery pictogram visible on the display,
after some time the software automatically switches off the scale to
protect the accumulators from excessive discharge,
• Accumulator charging process is signaled by blinking pictogram
(blinking interval: 2s) on the display.
15.4.3. Accumulator charging options
The function provides enabling or disabling charging option of NiMH
accumulators.
a) Parameter <5.5.CHr6> is set to <no>:
• Pictogram
is not displayed, charging option is disabled.
• On scale start, the display shows message <bAtt>.
b) Parameter <5.5.CHr6> is set to <YES>:
• Pictogram
is blinking while accumulators charging process
(blinking interval 2s), charging option is enabled.
• On scale start the display shows message <nImh>,
• In case the accumulators are defected or missing, the pictogram
is blinking quickly (with very short intervals ~ 0,5s).
Caution:
The indicator of a medical scale comes standard with a set of new NiMH
accumulators, size AA (R6), and a power adapter.
Procedure:
• Enter submenu <P5. othr> in accordance with point 11.2 of the user
manual, and: