Selection of basic measuring unit – RADWAG WPT/8B 300C Ramps Bed Scales User Manual
Page 22
- 22 -
indication returning to AUTOZERO zone – signaled by pictogram
on
the display.
As the indication returns to zero, the pictogram of the II weighing range is
switched off, and the scale measures mass with the accuracy of the I
weighing range.
12.5. Selection of basic measuring unit
The scale enables setting a measuring unit which is activated on scale’s
switch on.
Procedure:
• Enter submenu <P3.Unit> in accordance with point 11.2 of this user
manual, and:
• Press
key for a few times, and the display indicates available
measuring units in sequence:
Available settings:
A. If the main measuring unit is [kg], the user can select between the
following units: [kg, lb, N] in case of verified scales [lb] unit is
disabled,
B. If the main measuring unit is [g], the user can select between the
following units: [g, ct, lb] in case of verified scales [lb] unit is
disabled.