RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 31)

- 31 -
Return to weighing:
See point - 11.2.2. – return to weighing.
Caution:
When bL=Auto, and the mass indication does not change for
approximately 10 seconds, then the display backlight is automatically
switched off. The backlight is automatically activated on mass indication
change.
15.1.2. Display backlight for supply from batteries or accumulators
Depending on user needs (and visibility (operation of light) in the scale’s
place of use) the user can adjust brightness of display backlight between 0
% and 100 %. In lower display brightness levels the operation time on
batteries / accumulators in longer. For setting display brightness level,
operation of display backlight is always set to Auto.
Procedure:
• Enter submenu <P5. othr> in accordance with point 11.2 of the user
manual, and:
Return to weighing:
See point - 11.2.2. – return to weighing.