RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 5)

- 5 -
1. INTENDED USE
RADWAG medical scales are designed to measuring mass of weighed
patients.
In case of personal scales, the mass determining process is carried out
when a patient stands on the scale’s weighing platform, on chair scales –
when a patient is sitting, and on bed scales a patient is weighed while lying
on a bed. Baby scales enable determining body mass of a baby who is
lying on scale’s platform. Each of medical scales enables tarring in the
whole measuring range.
Functions:
• Display backlight,
• Digital filters (adjusting scale’s operation to ambient and operating
conditions of the place of use),
• Median filter,
• Autozero function,
• Manual setting of tare value,
• Baud rate settings,
• Determining minimum mass for operating of automatic functions,
• Automatic scale’s switch off,
• User adjustment (available in non-verified scales),
• Peak hold – weighing with locking the measurement result on the
display - HOLD,
• Determining BMI factor.
2. PRECAUTIONATY MEASURES
2.1. Maintenance
A. Read the user manual carefully before commissioning and using the
scale according to its intended use;
B. Instruments to be decommissioned should be decommissioned in
accordance with valid legal regulations.
2.2. Battery pack
Medical scales featuring an indicator PUE C/31 series (plastic housing) are
designed for buffer powering by NiMH batteries / accumulators) with rated
voltage 1,2V, size R6 (AA) and capacity from 1800 to 2800mAh.