RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 32)

- 32 -
Caution:
Enabled display backlight shortens scale’s operation time on batteries /
accumulators.
15.2. “beep” sound – scale reaction to pressing a key
Procedure:
• Enter submenu <P5. othr> in accordance with point 11.2 of the user
manual, and:
bEEP no - beep sound on pressing a key disabled
bEEP YES - beep sound on pressing a key enabled
Return to weighing:
See point - 11.2.2. – return to weighing.
15.3. Scale automatic switch off
This function is essential to save energy while powering the scale from
batteries / accumulators. If the t1 function is enabled, the scale switches off
within 5 minutes, on condition there is no activity carried out on the scale
(i.e. mass indication on the display does not change).