Start mass adjustment – RADWAG WPT/8B 300C Ramps Bed Scales User Manual
Page 43
Advertising
- 43 -
Return to weighing with procedure of saving changes:
See point - 11.2.2. – return to weighing.
17.2. Start mass adjustment
If the scale does not require the full adjusting process, or the user does not
have sufficient number of adjustment weights, it is possible
to adjust the start mass only.
Procedure:
• Enter submenu <P6.CAL> in accordance with point 11.2 of the user
manual, and:
• The software displays the following messages / commands:
• After completing start mass adjustment process, the scale returns to
displaying parameter’s name:
• Start mass adjustment process can be aborted at optional moment by
pressing
key, which is signaled by displaying the following
message:
Advertising
This manual is related to the following products: