Median filter – RADWAG WPT/8B 300C Ramps Bed Scales User Manual
Page 25
Advertising
- 25 -
1 - 4 - filtering level set in relation to current ambient and operating
conditions
Return to weighing:
See point - 11.2.2. – return to weighing.
Caution:
The higher filtering level, the longer stabilization time of measurement
result.
13.2. Median filter
The median filter is to eliminate short impulse disturbances (like
mechanical shocks).
Procedure:
• Enter submenu <P1.rEAd> in accordance with point 11.2 of this user
manual, and:
Fnnd
no
- median filter operation disabled
Fnnd
YES - median filter operation enabled
Return to weighing:
See point - 11.2.2. – return to weighing.
Advertising
This manual is related to the following products: