Serial transmission parameters – RADWAG WPT/8B 300C Ramps Bed Scales User Manual
Page 29
Advertising
- 29 -
14.3. Serial transmission parameters
• Enter submenu <P2.Prnt> in accordance with point 11.2 of this user
manual, and:
7d2SnP - 7 data bits; 2 stop bits, no parity control
7d1SEP - 7 data bits; 1 stop bit, EVEN parity control
7d1SoP - 7 data bits; 1 stop bit, ODD parity control
8d1SnP - 8 data bits; 1 stop bit, no parity control
8d2SnP - 8 data bits; 2 stop bits, no parity control
8d1SEP - 8 data bits; 1 stop bit, EVEN parity control
8d1SoP - 8 data bits; 1 stop bit, ODD parity control
Return to weighing:
See point - 11.2.2. – return to weighing.
Advertising
This manual is related to the following products: