RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 30)

- 30 -
15. OTHER PARAMETRS
The scale enables setting parameters influencing its operation, like display
backlight, “beep” sound, automatic switch off mode. These parameters are
grouped in menu <P5.othr>,
15.1. Display backlight
The scale software automatically recognizes power supply mode (mains,
accumulators) and adjusts display backlight mode:
• bL – for power supply from mains
• blbA – for power supply from batteries or accumulators
15.1.1. Display backlight for supply from mains
Procedure:
• Enter submenu <P5. othr> in accordance with point 11.2 of the user
manual, and:
bL no - Backlight disabled
bL YES - Backlight enabled
bL Auto - Backlight in automatic mode, i.e. switched off if
display indication does not change for 10
seconds