RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 48)

- 48 -
XX _ E CR LF
an error occurred on command carrying out (time limit exceeded
while waiting for stable measurement result (time limit is
balance’s characteristic parameter)
XX - stands for a name of sent command
_ - substitutes spaces
20.4. Command’s description
20.4.1. Zero scale
Format Z CR LF
Accessible responses:
Z_A CR LF
Z_D CR LF - command understood and in progress
- command carried out
Z_A CR LF
Z_^ CR LF - command understood and in progress
- command understood but zeroing range exceeded
Z_A CR LF
Z_E CR LF - command understood and in progress
- time limit exceeded while waiting for stable measurement result
Z_I CR LF - command understood but not accessible at this moment
20.4.2. Tare scale
Format: T CR LF
Accessible responses:
T_A CR LF
T_D CR LF
- command understood and in progress
- command carried out
T_A CR LF
T_v CR LF - command understood and in progress
- command understood but tarring range exceeded
T_A CR LF
T_E CR LF - command understood and in progress
- time limit exceeded while waiting for stable measurement result
T_I CR LF - command understood but not accessible at this moment
20.4.3. Give tare value
Format: TO CR LF
Response: TO_TARA CR LF - command carried out