RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 6)

- 6 -
Indicators plugged to mains automatically monitor and maintain batteries /
accumulators charging status.
In case of scale’s / indicator’s elongated storage in low
temperatures, it is not allowed to fully discharge the
accompanied batteries.
The equipment including accumulators does not belong
to your regular household waste. The European legislation
requires that electric and electronic equipment be collected
and disposed separately from other communal waste with
the aim of being recycled.
Hint:
Some symbols on accumulators / batteries identify harmful compounds:
Pb = lead,
Cd = cadmium,
Hg = mercury.
2.2.1. Power supply of scales featuring an indicator in plastic
housing
New NiMH accumulators, which come standard with the indicator PUE
C/31 series in plastic housing require forming in accordance with the
procedure contained in point 15.4.4 of this user manual.
Alternatively, the indicator can be powered by standard R6 / AA batteries.
Should an indicator be powered from standard batteries, not the NiMH
accumulators, then:
• Before installing the batteries inside the indicator’s housing, power the
indicator from mains only, and go to menu parameter <5.5.CHr6> and
change its value to <no>,
• On completing the above step it is possible to assemble standard
batteries to indicator’s batteries compartment.