Avaya 555-233-116 - Manual (Page 110)

External modems
555-233-116 110 Issue 4 October 2002
Multi-Tech MT5634ZBA-USB
Avaya recommends using a Multi-Tech modem, model MT5634ZBA-USB, for use
with an S8300/G700 configuration.
To connect a Multi-Tech modem for a G700 Media Gateway/S8300 Media Server
configuration:
■
Plug the USB connector of the Multi-Tech modem into one of the two USB
ports on the front of an S8300 Media Server.
■ Connect the phone cable to the modem.
NOTE:
The Multi-Tech modem, model MT5634ZBA-USB, is also used for the
S8700 Media Server.
Configuring the MT5634ZBA-USB modem
The Multi-Tech MT5634ZBA-USB modem either gets configured automatically
through the USB port with the factory defaults. No special configuration is
necessary.
Administration
You have to administer each modem that you attach to the system.
NOTE:
Only the basic procedure is covered here. For the full range of options, see
the Administrator’s Guide for Avaya MultiVantage Software, 555-233-506.
Accessing the administration form
1. Open the modem-administration form. At the management terminal, enter
change system-parameters maintenance.
2. Scroll to page 3 of the form.
Identifying the modem
1. On the modem-administration form, set the Modem Connection: field to
external (it should be set to none if no modem is installed).
This field generates alarms if it is not administered correctly. It cannot be
set to none if Alarm Origination is activated.
2. Set the Modem Name: field to a unique, 20-character, alphanumeric
identifier.