Avaya 555-233-116 - Manual (Page 210)

Multimedia communications products: MMCX, MMCH,
ESM
555-233-116 210 Issue 4 October 2002
Figure 58. Typical nonsignaling wideband configuration
If using a CSU, the distance between connections may be up to 1300 ft.
(397.2 m). The maximum distance to the endpoint depends on the type of cable
and the specifications of the endpoint.
Signaling configuration
A signaling connection from the system to a wideband endpoint passes through a
bandwidth controller. The distance between the system and the bandwidth
controller depends on the type of cable and controller.
Figure 59 shows
connections with and without a CSU.
1. Wideband endpoint (wire per manufacturer)
2. Modular cord
3. 103A or modular wall jack
4. Channel service unit (CSU)
5. H600-307 cable to DTE connector on CSU 6. DS1/E1 circuit pack
7. Main distribution frame (MDF)
8. Distance limit depends on cable and
endpoint type.
9. A25D 25-pair cable (male-to-male)
cydf049 RPY 123097
AUX PORT COM PORT MODEM
DTE
NETWORK POWER
1
1
2
2
3
3
4
5
6
6
7
8
9