Avaya 555-233-116 - Manual (Page 92)

Data modules and asynchronous data units
555-233-116 92 Issue 4 October 2002
29. Press the NEXT/NO button until the SIGLS DISC = correctValue? or
SIGLS DISC -> correctValue? prompt appears. Then press the ENTER/
YES button.
30. When the CONTINUE? prompt appears, press the ENTER/YES button.
31. When the SET TM LEAD? prompt appears, press the ENTER/YES button.
32. Press the NEXT/NO button until the TM = OFF? or TM -> OFF? prompt
appears, then press the ENTER/YES button.
33. When the DONE? prompt appears, press the ENTER/YES button.
34. When the SAVE CHANGES? prompt appears, press the ENTER/YES
button .
The CHANGES SAVED message flashes on screen, and you return to the
HOME screen. The data module is now configured.
SIGLS DISC = ON?
DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow ( ➜ )
SET TM LEAD?
DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow ( ➜ )
TM = OFF?
DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow ( ➜ )
DONE?
DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow ( ➜ )
SAVE CHANGES?
DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow ( ➜ )