Avaya 555-233-116 User Manual
Page 87
Connect data modules
Issue 4 October 2002
87
555-233-116
2. When the ANS = AUTO? prompt appears, press the ENTER/YES button
for most applications.
Configuring the RS-232 interface of the 7400D
From the front panel, you can set each pin of the RS-232 cable to meet the needs
of specific applications, though in most cases, the settings below should work.
1. When the SET CI LEAD? prompt appears, press the ENTER/YES button.
2. Press the NEXT/NO button until you see the CI = correctSetting? or
correctSetting? prompt. Then press the ENTER/YES button.
3. When the CONTINUE? prompt appears, press the ENTER/YES button.
4. When the SET CH LEAD? prompt appears, press the ENTER/YES button.
ANS = AUTO?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
➜ ●
Push the button indicated by the arrow (
➜
)
SET CI LEAD?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
➜ ●
Push the button indicated by the arrow (
➜
)
CI = correctSetting?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
➜ ●
Push the button indicated by the arrow (
➜
)
CONTINUE?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
➜ ●
Push the button indicated by the arrow (
➜
)
SET CH LEAD?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
➜ ●
Push the button indicated by the arrow (
➜
)