Avaya 555-233-116 - Manual (Page 175)

Connecting a CDR device
Issue 4 October 2002 175 555-233-116
The CDR System Parameters screen appears.
2. In the Primary Output Endpoint field, type CDR1. If you use a
secondary output device, and that device is also connected through TCP/
IP, type CDR2 in the
Secondary Output Endpoint field.
3. Press ENTER to save your changes.
Testing the switch-to-adjunct link
You can use the test, status, busyout and release commands for to find and
correct problems with CDR links. For more information about these commands,
see the Maintenance manual for your switch.
You should also work with the vendor to test the link from the call accounting end.
If you are installing the INTUITY Lodging Call Accounting, work with the Homisco
technician to test the link.
If a link does not come up immediately, try using the busyout cdr-link and release
cdr-link commands.
change system-parameters cdr Page 1 of 1
CDR SYSTEM PARAMETERS
Node Number (Local PBX ID): CDR Date Format: month/day
Primary Output Format: printer Primary Output Endpoint: CDR1
Secondary Output Format:
Use ISDN Layouts? n
EIA Device Bit Rate: 9600
Use Enhanced Formats? n Condition Code ‘T’ for Redirected Calls? n
Modified Circuit ID Display? n Remove # From Called Number? n
Record Outgoing Calls Only? y Intra-switch CDR? n
Suppress CDR for Ineffective Call Attempts? y CDR Call Splitting? y
Disconnect Information in Place of FRL? n Attendant Call Recording? y
Interworking Feat-flag? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Calls to Hunt Group - Record: member-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Called Agent Login ID Instead of Group or Member? n
Inc Trk Call Splitting? n
Record Non-Call-Assoc TSC? n
Record Call-Assoc TSC? n Digits to Record for Outgoing Calls: dialed
Privacy - Digits to Hide: 0 CDR Account Code Length: 4
status cdr-link
CDR LINK STATUS
Primary Secondary
Link State: up extension not administered
Maintenance Busy? no