Avaya 555-233-116 - Manual (Page 179)

Issue 4 October 2002 179 555-233-116
14 DEFINITY INADS
The DEFINITY ® initialization and administration system (INADS) provides analog
loopback connections and PARTNER connections for remote alarming and
maintenance when direct connection to the public network is not possible.
NOTE:
These instructions are for Avaya Media Server or Gateway systems using
the TN1648/B system access/maintenance (SYSAM) circuit pack. ISDN is
required. These instructions do not apply to the S8300 or the S8700 Media
Servers in a G700 Media Gateway configuration.
Analog loopback
Analog loopback connects the INADS port to an analog station port. It switches
the call through the AUX connector on the processor carrier, across an analog line
circuit pack, and out to the public network. Direct Inward Dialing (DID) is optional.
Installing INADS analog loopback on a
standard-reliability system
1. Connect the INADS tip and ring port from the AUX connector to an analog
station port through the MDF. See Figure 40 . Use wire pair 50 and 25.
2. If you are using power fail transfer, connect the 808A2 transfer panel
between the INADS connection to the station and the INADS connection to
the loop-start trunk.
NOTE:
The 808A power fail transfer unit is not supported on the G700 Media
Gateway.