Avaya 555-233-116 - Manual (Page 159)

Converters for single-carrier cabinets
Issue 4 October 2002 159 555-233-116
PRI-to-BRI converter
Figure 35 shows typical connections from the PRI-to-BRI converter to the coaxial
facility.
Figure 35. Typical PRI to BRI converter cabling
NOTE:
The inset shows details of the cable connections between the circuit packs.
Connect the DEFINITY administration PC to the RS-232 connector on the
front of the PRI converter circuit pack.
1. To TN464F DS1 circuit pack and
PRI-to-BRI converter circuit pack
2. DEFINITY administration PC
3. RS-232 cable to front of converter
circuit pack
4. 888B coaxial converter
5. Coaxial connection to 2-Mbps
facility
6. Coaxial cable from PRI converter
circuit pack to coaxial converter
7. TN464F circuit pack
8. PRI-to-BRI converter circuit pack
9. Jumper coaxial cable
10. Inset showing connections on rear of
carrier
0007_0 RBP 051396
7
(2B+D)
1
(2B+D)
8
(2B+D)