BNC 1201 - 6 1/2 Digit Digital Multimeter - Manual (Page 121)

122
AVERage:AVERage?
AVERage:COUNt?
CALCulate:
NULL:OFFSet {<value>|MINimum|MAXimum}
NULL:OFFSet? [MINimum|MAXimum]
CALCulate:
LIMit:LOWer {<value>|MINimum|MAXimum}
LIMit:LOWer? [MINimum|MAXimum]
LIMit:UPPer {<value>|MINimum|MAXimum}
LIMit:UPPer? [MINimum|MAXimum]
CALCulate:
MXB:MMFactor {<value>|MINimum|MAXimum}
MXB:MMFactor? [MINimum|MAXimum]
MXB:MBFactor {<value>|MINimum|MAXimum}
MXB:MBFactor? [MINimum|MAXimum]
CALCulate:
DB:REFerence {<value>|MINimum|MAXimum}
DB:REFerence? [MINimum|MAXimum]
CALCulate:
DBM:REFerence {<value>|MINimum|MAXimum}
DBM:REFerence? [MINimum|MAXimum]
DATA:FEED RDG_STORE,{“CALCulate”|””}
DATA:FEED?
TRIGGERING
1201 provides a variety of trigger operations for user. User can select a
trigger mode, a trigger source and different trigger settings for a specific
measurement. Refer to Figure 4-8 for triggering system flow chart.
Triggering from a remote interface is a multi-step sequence. You must
first configure the mulitmeter by choosing the desired function, range
and resolution. Specify the trigger source from which the multimeter will