BNC 1201 - 6 1/2 Digit Digital Multimeter - Manual (Page 157)

158
SYSTem:VERSion?
Query the present SCPI version.
L0
Set to the default identification string.
L1
Set to the compatible identification string.
SYSTEM:IDNSTR "Manufacturer,Product"
Change the multimeter’s identification string, such as the maker’s and the
product’s names (be sure to dimension a string variable with at most 39
characters).
DATA:POINts?
Query the number of readings stored in the multimeter’s internal memory.
*RST
Reset the multimeter to the power-on configuration. This command can not
clear the error queue.
*IDN?
Read the multimeter’s identification string (be sure to dimension a string
variable with at least 35 characters).
Other Interface Commands
SYSTem:LOCal
Place the multimeter in the local mode. All buttons on the front panel are fully
functional.
SYSTem:REMote
Place the multimeter in the remote mode. All buttons on the front panel, except
the LOCAL button, are disabled.
C.9 Status Reporting Commands