BNC 1201 - 6 1/2 Digit Digital Multimeter - Manual (Page 58)

59
Front Panel Operation
There are two ways to set the resolution. The locations of the buttons are
shown with red rectangle frames in Figure 4-3.
A.
First select your desired measurement function by pressing one of the
function buttons located on the first row of your meter's front panel.
Press DIGITS button to select your desired resolution for your
measurement. User can press DIGITS button several times to see
how the resolution setting changes from 4.5, 5.5 to 6.5.
※ Note: When using Method A to set the resolution, your options are 4.5
(slow), 5.5 (slow) and 6.5 (fast).
B.
Press CONFIG and then select a function as you wish from DCV, DCI
(SHIFT +DCV), Ω2, Ω4 (SHIFT + Ω2), FREQ and PERIOD (SHIFT +
FREQ).
Press ENTER on RESOLUTION submenu. If it is not shown on the
display, use ◁ and ▷ to locate it.
Use ◁ and ▷ to find your desired resolution. Press ENTER on your
choice.
※ Note: The resolution of AC measurements is fixed at 6.5 digit.
※ Note: The options for frequency and period measurements are 4.5
(slow), 5.5 (slow) and 6.5 (slow).
Figure 4-3
or