BNC 1201 - 6 1/2 Digit Digital Multimeter - Manual (Page 146)

147
[SENSe:]TCOuple:TYPE {E|J|K|N|R|S|T}
Select thermocouple sensor type.
[SENSe:]TCOuple:TYPE?
Query thermocouple sensor type.
[SENSe:]TCOuple:RJUNction:RSELect {REAL|SIMulated }
Select a reference junction type, real or simulated.
[SENSe:]TCOuple:RJUNction:RSELect?
Query the reference junction type, real or simulated.
[SENSe:]TCOuple:RJUNction:SIMulated {<value>|MINimum|MAXimum}
Set the default temperature of the simulated reference junction.
[SENSe:]TCOuple:RJUNction:SIMulated?
Query the default temperature of the simulated reference junction.
[SENSe:]TCOuple:RJUNction:REAL:OFFSet {<value>|MINimum|MAXimum}
Set the offset voltage of the real reference junction.
[SENSe:]TCOuple:RJUNction:REAL:OFFSet? [MINimum|MAXimum]
Query the offset voltage of the real reference junction.
[SENSe:]TEMPerature:RTD:TYPE {PT100|D100|F100|PT385|PT3916|USER|SPRTD|NTCT}
Select the RTD type for temperature measurement with RTD.
[SENSe:]TEMPerature:RTD:TYPE?
Query the RTD type for temperature measurement with RTD.
[SENSe:]TEMPerature:RTD:RZERo {<value>|MINimum|MAXimum}
Set the R-Zero constant for the user defined RTD type.
[SENSe:]TEMPerature:RTD:RZERo? [MINimum|MAXimum]
Query the R-Zero constant for the user defined RTD type.
[SENSe:]TEMPerature:RTD:ALPHa {<value>|MINimum|MAXimum}
Set the alpha constant for the user type.