ACU-RITE 300S READOUTS - Manual (Page 108)

94 II
II - 4 I/O Connections
External Operations via RS-232 Data Interface
The display unit can be operated over the RS-232 data interface using
an external device. Special commands available: <Ctrl>B ‘Send
Current Position’, <Ctrl>P ‘Send Screen Capture’. The following key
commands are available:
Format
<ESC>TXXXX<CR> Key is pressed
<ESC>AXXXX<CR> Output of screen contents
<ESC>SXXXX<CR> Special functions
Sequence of commands Function
<ESC>T0000<CR> Key ‘0’
<ESC>T0001<CR> Key ‘1’
<ESC>T0002<CR> Key ‘2’
<ESC>T0003<CR> Key ‘3’
<ESC>T0004<CR> Key ‘4’
<ESC>T0005<CR> Key ‘5’
<ESC>T0006<CR> Key ‘6’
<ESC>T0007<CR> Key ‘7’
<ESC>T0008<CR> Key ‘8’
<ESC>T0009<CR> Key ‘9’
<ESC>T0100<CR> Key ‘C’
<ESC>T0101<CR> Key ‘+/-’
<ESC>T0102<CR> Key ‘.’
<ESC>T0104<CR> Key ‘ENT’
<ESC>T0109<CR> Axis Key ‘1’
<ESC>T0110<CR> Axis Key ‘2’
<ESC>T0111<CR> Axis Key ‘3’
<ESC>T0112<CR> Axis Key ‘4’ (4 Axis DRO only)
<ESC>T0114<CR> ‘Soft key 1’
<ESC>T0115<CR> ‘Soft key 2’
<ESC>T0116<CR> ‘Soft key 3’
<ESC>T0117<CR> ‘Soft key 4’
<ESC>T0135<CR> ‘Left Arrow’
<ESC>T0136<CR> ‘Right Arrow’
<ESC>T0137<CR> ‘Up Arrow’
<ESC>T0138<CR> ‘Down Arrow’