ACU-RITE 300S READOUTS - Manual (Page 82)

68 I
I - 5 Pr
ogr
amming 30
0S
View Soft Key
The VIEW soft key is used to toggle between the program listing with
the DRO (ABS) positions, and graphical view of the part program.
When Program Mode is selected, the view defaults to the program
listing view.
Press the VIEW soft key to show a graphical view of the part program.
The datum, position, circle pattern, and linear pattern steps have a
graphical view. The features of the part are scaled to the size of
the window.
„ The datum is drawn as a vertical and horizontal line representing the
(0,0) location.
„ The position and holes of a hole pattern are drawn as circles. The
diameter of the programmed tool is used to draw the holes.