ACU-RITE 300S READOUTS - Manual (Page 62)

48 I
I - 3 Milling Specific Oper
ations
Press the ENTER key to close the form and save the feature to the
table. Press the RUN soft key to execute the surface milling
operation. Press C hard key to exit the form without saving the
feature.
Incline, and Arc Mill Execution
8 To execute a milling operation, select the feature from the table to
open the entry form.
8 Press the RUN soft key.
„ The screen switches to the incremental DRO view, showing the
incremental distance from the start point.
The following soft keys are available while running an Incline, or Arc
Milling feature.
The tool radius compensation is applied based on the radius of the
current tool. If the plane selection involves the tool axis, the tool tip is
assumed to have a ball end.
8 Move to the start point and make a plunge cut or the first pass
across the surface.
8 Press the NEXT PASS, soft key to continue with the next step along
the contour.
„ The incremental display shows the distance from the next pass
along the line, or arc’s contour.
Function Soft key
Press to select the incremental DRO, contour
view of feature, or absolute DRO
Press to return to the previous pass.
Press to advance to the next pass.
Press to end execution of the milling operation.