ACU-RITE 300S READOUTS - Manual (Page 33)

300S 19
I - 2 Gener
a
l Oper
ations f
o
r 30
0S
Console Adjustment
The LCD’s brightness and contrast can be adjusted either by using the
soft keys in this form, or by using the UP/DOWN arrow keys on the
keypad in either operating mode. The settings of brightness, and
contrast may need to be adjusted due to variations in ambient lighting,
and operator preference. This form is also used to set the display
saver’s idle time-out. The display saver setting is the amount of time
the system is idle before the LCD is turned off. The idle time may be
set from 30 to 120 minutes. The display saver can be disabled during
the current power cycle.
Language
The 300S supports multiple languages. To change the
language selection:
8 Press the LANGUAGE soft key until the desired language selection
appears on the soft key, and the form.
8 Press ENTER to confirm your selection.
Import/Export
Job, and Installation Setup parameters can be imported or exported
using the serial port. See "Data Interface" on page 89.
8 Press the IMPORT/EXPORT soft key in the Setup screen.
8 Press IMPORT to download operating parameters from a PC.
8 Press EXPORT to upload the current operating parameters to a PC.
8 Press the C key to exit.