ACU-RITE 300S READOUTS - Manual (Page 80)

66 I
I - 5 Pr
ogr
amming 30
0S
I - 5 Programming 300S
Overview
The basic machining operations available in the DRO mode (i.e. tool
selection, preset, hole patterns) can also be used to create a program.
A program is a sequence of one or more machining operations.
Programs can be executed a number of times and saved for later use.
Each machining operation is a separate step with the program. A
program can have up to 250 steps. The program listing shows the
step numbers, and the associated machining operations.
Programs can be saved to internal storage, which isn’t lost when
power is off. The readout can hold up to 8 programs in internal
storage. Programs can also be saved to external storage on a PC using
the export and import functions.
To access the Program Mode, from the DRO mode, press the
PROGRAM soft key. A listing of the current program loaded (or a
blank listing) is displayed. Also displayed are the soft keys VIEW,
FEATURES, RUN, HELP, PROGRAM FUNCTIONS, and STEP
FUNCTIONS.
Press the LEFT, or RIGHT ARROW keys to view more
soft key choices.