ACU-RITE 300S READOUTS - Manual (Page 83)

300S 69
I - 5 Pr
ogr
amming 30
0S
Feature Soft Key functions
To access the available features, press PROGRAM, then the
FEATURES soft key. The following soft keys will be available. Use the
LEFT
, and RIGHT arrow keys to toggle through the menu. Note that in
program mode the C key will clear the entry
Function Soft key
Press to enter a Tool step into the program. See
"Tool Soft Key" on page 22..
Press to enter a Datum step. See "Datum Soft
Key" on page 28..
Press to enter a Preset step into the program.
See "Presets" on page 33..
Press to enter a Position step (mill only).
Press to enter a Circle Pattern step (mill only).
See "Circle, and Linear Patterns" on page 38..
Press to enter a Linear Pattern step (mill only).
See "Circle, and Linear Patterns" on page 38..
Press to enter an Incline Mill step (mill only).
See "Incline, and Arc Milling Table Entry" on page
45..
Press to enter an Arc Mill step (mill only). See
"Arc Milling" on page 47.