ACU-RITE 300S READOUTS - Manual (Page 3)

300S i
300S Key Layout
300S Soft keys
There are multiple pages of soft key functions to select from the
operating modes. Use the LEFT/RIGHT arrow keys [4] to cursor
through each page. The page indicator in the Status Bar will show the
page orientation. The darkened page indicates the page you are
currently on.
1 Display Area
2 Soft keys
3 Power Indicator light
4 Arrow Keys: Use the UP/DOWN keys to adjust the
screen contrast.
5 Axis Keys
6 Numeric Keypad
7 ENTER key
8 CLEAR key
1 Page Indicator
2 Set Zero Indicator
Soft Key function (Page 1) Soft key
Opens on-screen help instructions.
Opens the Tool Table. Page 22 for Milling, and
page 51 for Turning.
Switches display between operating modes
Actual Value (Absolute) / Distance-to-Go
(incremental). See page 12.
Toggles between Set/Zero functions. Used
with individual axis keys (page 20).
Soft Key function (Page 2a) Soft key
Opens the Datum form to set the datum for each axis
(
page 28 ).
Opens the Preset form. This form is used to set a
nominal position. This is a Distance-To-Go
(Incremental) function (
page 33 ).
Used to divide the current position by two ( page 36 ).
1 1
1 2
1 4
1 5
1 6
1 7 1 8
3
1
1 2
1