ACU-RITE 300S READOUTS - Manual (Page 31)

300S 17
I - 2 Gener
a
l Oper
ations f
o
r 30
0S
Remote Switch
The remote switch sets the parameters so the external switch
(pendant, or foot switch) can be enabled to perform any or all of the
following functions: Data Output; Zero, and Next Hole. Refer to
Section II for information on connecting remote switches via
Grounding Edge Finder input.
„ Data Output - to send position information out of the serial port or to
print the current position.
„ Zero - to zero one or more axes. In Distance-To-Go mode, it will zero
the Distance-To-Go display. In Actual Value mode, it will zero the
datum).
„ Next Hole key press will move to the next hole within a pattern (i.e.
Hole Pattern).
8 While in the Data Output Field, press the ON/OFF soft key to ON
to send the current position over the serial port when the switch
is closed.
8 While in the Zero Field, press the appropriate axis keys to enable
or disable zeroing of the axis display positions when the switch is
closed.
8 While in the Next Hole Field, press the ON/OFF soft key to ON to
move to the next hole within a pattern.
DRO View Settings
The 300S has the ability to define up to two DRO display
configurations (views). Each view defines which axes displays appear
on the screen when the view is selected.
With two views available, one may be set to all available axes, and the
other may be a subset of the axes.