ACU-RITE 300S READOUTS - Manual (Page 85)

300S 71
I - 5 Pr
ogr
amming 30
0S
Linear Pattern Soft Key (mill only)
The LINEAR PATTERN soft key is used to specify the parameters of a
linear pattern from within a program. Open the Linear Pattern table by
pressing the LINEAR PATTERN soft key. Use the UP, and DOWN
arrow keys to select the desired pattern, then press USE. The step
that was highlighted in the program will become a Linear Pattern step.
To modify the selected pattern, press ENTER, or the EDIT soft key. In
the form; enter the new pattern parameters, then press ENTER.
Incline Mill (mill only)
The INCLINE MILL soft key is used to provide a way to machine a flat
diagonal surface from within a program. Open the Incline Mill Table
by pressing the INCLINE MILL soft key. Use the UP, and DOWN
arrow keys to select the desired incline mill feature, then press USE.
The step that was highlighted in the program will become an Incline
Mill step.
To modify the selected pattern, press ENTER, or the EDIT soft key. In
the form; enter the new pattern parameters, then press ENTER.
Arc Mill (mill only)
The ARC MILL soft key is used to provide a way to machine a rounded
surface from within a program. Open the Arc Mill Table by pressing
the ARC MILL soft key. Use the UP, and DOWN arrow keys to select
the desired arc mill feature, then press USE. The step that was
highlighted in the program will become an Arc Mill step.
To modify the selected pattern, press ENTER, or the EDIT soft key. In
the form; enter the new pattern parameters, then press ENTER.