ACU-RITE 300S READOUTS - Manual (Page 74)

60 I
I - 4 T
u
rn
ing Specific Oper
ations
Function Soft key
Press FIRST PASS soft key to begin the thread
cycle feature.
Press NEXT PASS soft key to continue the
thread cycle features next cut.
Press START PASS soft key to begin the thread
cycle features next cut.
Press PREVIOUS PASS soft key if a cut is
aborted during the thread cycle feature, and
needs to be started again.
Press FINISH PASS soft key when the feature
has been setup in the thread cycle form for a
final cut.
Press END soft key to exit the thread cycle
feature.
Press VIEW soft key to view current tool
location during the operation of the thread cycle
feature.