Ethernet communication (j3) – ElmoMC ExtrIQ Gold Line Servo Drives-Gold Solo Hornet User Manual
Page 69
Gold Solo Hornet Installation Guide (EtherCAT and CAN)
Installation
MAN-G-SOLHORIG-EC (Ver. 1.009)
69
4.11.4.2.
Ethernet Communication (J3)
Notes:
•
The EtherCAT IN port can be configured as an Ethernet port for TCP/IP – see the EtherCAT
Manual.
•
It is recommended to use shielded CAT5e (or higher) cable. Category 5e cable is a high
signal integrity cable with four twisted pairs.
The Gold Solo Hornet Ethernet communication pins are part of the J3 connector, see Section
4.3.2.3 for more details.
Pin (J3) Signal
Function
8
TX+
Ethernet In Transmit
9
TX-
Ethernet In Transmit Complement
11
RX+
Ethernet In Receive
12
RX-
Ethernet In Receive Complement
13
COMRET
Common Return
19
PE
Protective Earth
Pin Positions
Table 21: Ethernet - Pin Assignments