Chapter 3: installation, Before you begin, Site requirements – ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide User Manual
Page 16: Chapter 3, Installation
Solo Trombone Installation Guide
MAN-SOLTROIG (Ver. 1.203)
16
Chapter 3:
Installation
Warning:
The Solo Trombone must be:
•
installed in a suitable environment and properly connected to its voltage
supplies and the motor.
•
mounted and confined within a metal enclosure.
3.1. Before You Begin
3.1.1.
Site Requirements
You can guarantee the safe operation of the Solo Trombone by ensuring that it is installed in an
appropriate environment.
Feature
Value
Ambient operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Maximum operating altitude
2,000 m (6562 feet)
Maximum relative humidity
90% non-condensing
Operating area atmosphere
No flammable gases or vapors permitted in area
Models for extended environmental conditions are available.
Caution:
The Solo Trombone dissipates its heat by natural convection. The maximum
ambient operating temperature of 0 °C to 40 °C (32 °F to 104 °F) must not be
exceeded.